VERITY® 3240 High Pressure Binary Gradient Pump
Purify with Confidence
The VERITY® 3240 Pump delivers reproducible and precise elution gradients to achieve repetitive isolations of targeted compounds with Gilson automated purification platforms.
Scale Up Capabilities
The VERITY® 3240 Pump has been designed to effectively work with preparative HPLC columns from 10 mm to 50 mm ID allowing for scaling up purification from milligrams up to tens of grams on the same Gilson automated purification platform.
Workhorse in The Laboratory
The large flow rate and pressure range allows the VERITY® 3240 Pump to cover most semi-preparative to preparative HPLC purification needs.
Safe and Efficient
The VERITY® 3240 Pump has an optional leak detector to secure purifications. The optional inlet solvent selectors support high throughput purification on different column types and allow for quick column regeneration.
Specifications
VERITY® 3240 High Pressure Binary Gradient Pump | ||
Pump Type | High Pressure Binary Gradient Pump | |||||
Hydraulic System | Reciprocating Dual Piston Pumps | |||||
Flow Rate | Range 0.1-150 mL/minRecommended flow rate ≥3 mL/min |
|||||
Increment 0.1 mL/min |
||||||
Flow Accuracy1 | ±1% with a minimum pressure of 10 bar | |||||
Flow Precision / Repeatability1 | ≤0.3% from 15 to 150 mL/min | |||||
Gradient | Solvents Two |
|||||
Formation High Pressure Mixing with Static Mixer as part of Pressure, Purge, and Mixing Module (PPMM) |
||||||
Composition Increment 0.1% |
||||||
Gradient Accuracy2 | ±1% | |||||
Gradient Precision / Repeatability2 | ≤0.3% | |||||
Operating Pressure | 5–420 bar (70–6090 psi) up to 110 mL/min | |||||
5–320 bar (70–4640 psi) from 110 to 150 mL/min | ||||||
Priming | Manual with Built-in prime/purge valve via TRILUTION LC or Syringe | |||||
Communication | USB Serial Communication | |||||
Software Control | PC Control Via USB and TRILUTION LC V4.5 or higher | |||||
Physical | Dimensions (W X D X H) 36 x 45.5 x 24 cm (14.2 x 17.7 x 9.4 in.) |
|||||
Weight: 30 kg (66 lbs.) |
||||||
Shipping Weight: 35 kg (77 lbs.) |
||||||
Liquid Contact Materials | 316 / 316l / 316 Ti Stainless Steel, PEEK, PFA, PTFE, ETFE, PCTFE, Ketron® CA30 PEEK, FFKM (Kalrez®, Perlast®), Inconel®, Ruby, Sapphire, Zirconium Oxide, GFP | |||||
Environmental |
Indoor Use Only Operating Temperature 5°C to 40°C (41°F to 104°F) Operating Relative Humidity Up to 80% for temperatures up to 31°C, decreasing linearly to 50% at 40°C Operating Altitude Up to 2000 m Temperature Of Liquid Pumped 5°C to 40°C (41°F To 104°F) Pollution Degree Degree 2 (normally only nonconductive pollution occurs, temporary conductivity caused by condensation is to be expected) |
1 Flow specifications determined with a minimum pressure of 10 bar with H2O degassed at 20°C, on average value from a batch of pumps. | ||
2 Gradient specifications are determined for 5-95% with a minimum pressure of 50 bar, with water/water spiked with marker, on average value from a batch of pumps. |
Supporting Literature
2022-2023 Gilson Product Guide
The 2022-2023 Gilson Product Guide is available now. Discover best sellers for your Liquid Handling, Purification, and Extraction needs!
DownloadGilson Services and Calibration Programs
Gilson is committed to quality and complete customer satisfaction with all of our products and services. Get system support, training programs and pipette service from the people who know Gilson products the best. We are here to help and provide you with dependable solutions to accommodate your needs.
LEARN MORESpecial Offers
Discover savings on products, shipping and more with Gilson promotions and featured offers.